Serving the St. Petersburg area  ·  (727) 513-8756  ·  Open Mon-Sun 7am-7pm
📞 (727) 513-8756 Free Quote

Metal Roofing in South Pasadena, FL (33706) · Local Professionals

St. Petersburg Metal Roofing · Fast response in South Pasadena and the St. Petersburg area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+351Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

South Pasadena is a small, tight-knit city on the Pinellas peninsula, tucked between St. Pete Beach and Gulfport along Boca Ciega Bay. The housing stock here is mostly 1950s and 1960s concrete-block ranches with low-pitched shingle and flat-tar roofs, plus a growing number of elevated new builds on the waterfront. Lots are flat and sandy, often with mature oaks and palms, and salt air moves in off the bay year-round.

Homeowners in South Pasadena (33706) call St. Petersburg Metal Roofing because we understand what salt air and summer thunderstorms do to a roof here. We have replaced and repaired metal roofs on the same blocks near the South Pasadena Recreation Center and along Gulfport Boulevard, and we know the permitting quirks and HOA expectations that come with this city.

Metal Roofing in South Pasadena (33706)

South Pasadena sits low and flat, with sandy soil and tight lots that often leave little room for staging materials. Many homes here are concrete-block ranches with low-slope roofs, which means we frequently deal with ponding water, corroded fasteners, and flashing details that were never designed for salt-laden air. The waterfront properties along Boca Ciega Bay face constant wind-driven rain and UV exposure, so we spec heavier-gauge panels and stainless or coated fasteners to resist corrosion. Older homes near the South Pasadena Recreation Center often have multiple roof layers, and we have to verify with the city building department how many layers are allowed before a full tear-off is required.

Our team has worked throughout South Pasadena and the surrounding St. Petersburg area, from the small bungalows off Pasadena Avenue to the newer elevated homes near the bay. We know the local building department’s inspection process and can help you navigate HOA design review if your community has one.

Our services in South Pasadena

How a Job Works in South Pasadena

Step 1: Call us at (727) 513-8756 or request a free estimate online. We will schedule an on-site assessment at your South Pasadena property, inspect your existing roof, take measurements, and discuss your options. You will get a written estimate with clear pricing and no pressure.

Step 2: Once you approve, we pull the required roofing permit from the City of South Pasadena and coordinate with any HOA. On tight lots, we plan material delivery and staging carefully to avoid blocking neighbors. Our crews are fully insured and trained to handle the corrosion issues common in this salt-air environment, using fasteners and flashing that meet local wind and moisture requirements.

Step 3: After installation, we do a full magnetic sweep for nails and debris, haul away all old materials, and walk the roof with you to make sure you are satisfied. We leave your property clean and provide a final inspection checklist.

Metal roofing in South Pasadena is priced by the square foot, and the final cost depends on roof size, pitch, access, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal roof over shingles (retrofit) at $7. For repairs, metal roof leak repair starts at $450, and screw replacement and re-fastening starts at $750. Gutters for metal roofs start at $9 per linear foot. These are starting prices, not final quotes. Factors like tight lot access, multiple roof layers, and urgent storm damage can affect the total. Call (727) 513-8756 for a free, no-obligation estimate tailored to your South Pasadena home.

My 1950s ranch near the South Pasadena Recreation Center has a low-pitch roof and some ponding. Can metal roofing work on that?
Yes, but we need to address the ponding first. Low-slope roofs often need a tapered insulation system or a redesign of the drainage to prevent water from sitting on the panels. We will inspect your roof and recommend the right panel profile and slope corrections to handle South Pasadena’s heavy summer rains.
A storm just blew some panels loose on my waterfront home. How fast can you respond in South Pasadena?
We prioritize storm damage calls in South Pasadena and can usually schedule an inspection within 24 to 48 hours. Call us at (727) 513-8756 to report the damage. We will secure the roof temporarily if needed and provide a written repair estimate.
What does a typical metal roof replacement cost for a 1,500-square-foot home in South Pasadena?
For a 1,500-square-foot home with a standard pitch and easy access, a metal roof replacement typically starts around $9 per square foot, so you might be looking at roughly $13,500 and up. Factors like multiple layers, tight lot access, and the need for new flashing can increase the price. We give free estimates to South Pasadena homeowners.
Do I need a permit from the City of South Pasadena for a metal roof replacement?
Yes, a roofing permit is required for a full replacement or re-roof in South Pasadena. The city also limits how many layers of shingles can remain, so we verify that with the building department before starting. We handle the permit application and inspections for you.
My HOA requires a specific roof color. Can you help with approval?
We can provide color samples and manufacturer specifications for your HOA’s design review. Many HOAs in South Pasadena have restrictions on panel profile and color, and we will coordinate with your board to make sure the installation meets the community guidelines.
Are you fully insured for roofing work in South Pasadena?
Yes, we carry general liability insurance and workers’ compensation coverage.
What maintenance does a metal roof need in South Pasadena’s salt air?
Salt air corrodes fasteners and can degrade coatings over time. We recommend an annual inspection to check for loose screws, corrosion, and debris buildup, especially on waterfront homes. A simple wash-down and touch-up of any scratched areas can extend the life of your roof.
Why choose us?

Trusted professionals in St. Petersburg

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in St. Petersburg

All your work handled by qualified professionals in St. Petersburg

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

351+ Verified Client Reviews in St. Petersburg

⭐⭐⭐⭐⭐ 4.9/5 · 351 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in St. Petersburg · Response within 24h · No commitment · ☎ (727) 513-8756

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in St. Petersburg ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm