Serving the St. Petersburg area  ·  (727) 513-8756  ·  Open Mon-Sun 7am-7pm
📞 (727) 513-8756 Free Quote

Metal Roofing in Kenneth City, FL (33709) · Local Professionals

St. Petersburg Metal Roofing · Fast response in Kenneth City and the St. Petersburg area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+351Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Kenneth City is a tight, walkable grid of 1950s block ranches just north of St. Petersburg, where original shingle and flat-tar roofs are now hitting the end of their service life. The lots are small, the streets are narrow, and the houses sit close together, so a roof replacement here is as much about logistics as it is about materials.

Homeowners in the 33709 ZIP call St. Petersburg Metal Roofing because we know this housing stock and the specific problems it has. From the original carports and low-slope additions near Kenneth City Park to the older ranch homes off 54th Avenue North, we have worked on these roofs and know what it takes to get a metal roof installed right without tearing up the whole property.

Metal Roofing in Kenneth City (33709)

Kenneth City is almost entirely flat, sandy ground with small, rectangular lots and mature trees that drop limbs and shade the roof surface. Most homes here are single-story concrete-block and stucco ranches built in the 1950s and 1960s, many with low-pitched shingle roofs or flat-tar sections over additions and carports. That low slope is the key challenge: it limits which metal profiles will work, and it means flashing and transitions at the wall and carport lines have to be detailed carefully to handle the daily summer thunderstorms. The tight spacing between houses also means our crews have to plan panel delivery and staging carefully, often using the driveway and street without blocking neighbors.

Our team has been working on roofs across Pinellas County for years, and Kenneth City is one of the areas we know best. We have seen how the salt air and humidity here corrode cheap fasteners and thin panels, and we spec materials that hold up to the Gulf Coast climate. Whether it is a retrofit over the original shingles or a full tear-off, we handle the permit and inspection process with the local building department and keep you informed at every step.

Our services in Kenneth City

How a Job Works in Kenneth City

Step 1: You call us at (727) 513-8756 or request a free estimate online. We schedule an on-site assessment at your Kenneth City home, usually within a day or two. We look at the existing roof, the deck condition, the slope, and the access, and we talk through your options, including retrofit versus full replacement, and what makes sense for your budget and the age of your home.

Step 2: Once you approve the scope and price, we pull the roofing permit with the City of Kenneth City and coordinate the delivery of materials. On the work day, our crew arrives early, protects your landscaping and windows, and gets to work. Because lots are close together, we keep the site organized and clean as we go, and we make sure panels and tools are not left where they could be a hazard to neighbors or kids.

Step 3: When the job is done, we do a full cleanup, including a magnet sweep for nails, and walk the roof and the property with you. We do not leave until you are satisfied and understand the maintenance for your new metal roof.

Pricing for metal roofing in Kenneth City depends on the size and pitch of your roof, the condition of the deck, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and a retrofit over existing shingles at $7 per square foot. For smaller jobs, metal roof repair starts at $450, and screw replacement or re-fastening starts at $750. We give free estimates and explain the cost factors clearly, including any deck repairs or permit fees, so there are no surprises. Call (727) 513-8756 to schedule your free estimate in Kenneth City.

Can you install a metal roof over the original shingles on my 1950s ranch in Kenneth City?
In many cases, yes. Florida code allows a metal roof over existing shingles if the structure can handle the added weight and there is only one layer of shingles. We check the deck and framing during our free inspection and tell you honestly whether a retrofit is a good idea or if a full tear-off is safer for your home.
How fast can you respond to storm damage in Kenneth City?
We prioritize storm and wind damage calls, especially after a named storm or a strong afternoon thunderstorm. Call (727) 513-8756 and we will schedule an inspection as soon as possible, often the same day or next day. We can tarp active leaks and make temporary repairs to prevent further damage while we prepare a permanent fix.
What does a typical metal roof cost for a 1,200 square foot home in Kenneth City?
For a home that size, a basic corrugated or ribbed panel roof might start around $5.50 per square foot, while standing seam would be closer to $10 per square foot. The total depends on the roof complexity, the number of penetrations, and whether we are doing a retrofit or a tear-off. We provide a written estimate after seeing the roof.
Do I need a permit for a metal roof in Kenneth City, and who handles it?
Yes, roofing permits are typically required for a replacement or re-roof in Kenneth City. We handle the permit application and coordinate the required inspections with the City of Kenneth City building department as part of our service. Requirements can vary, so we always confirm the current rules before starting work.
My neighbor's oak tree hangs over my roof. What are the rules about trimming and property lines in Kenneth City?
In Florida, you generally have the right to trim branches that overhang your property line, but you cannot damage the tree or enter the neighbor's property without permission. If you are in an HOA, check the rules before trimming.
Are you insured for roofing work at my Kenneth City home?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property if anything goes wrong on the job.
What maintenance does a metal roof need in Kenneth City's climate?
Metal roofs are low maintenance, but the salt air and summer storms mean you should rinse the roof a couple of times a year to remove salt and debris, and check the fasteners and sealant at penetrations annually. We offer inspection and maintenance services to keep your roof and warranty in good shape.
Why choose us?

Trusted professionals in St. Petersburg

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in St. Petersburg

All your work handled by qualified professionals in St. Petersburg

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

351+ Verified Client Reviews in St. Petersburg

⭐⭐⭐⭐⭐ 4.9/5 · 351 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in St. Petersburg · Response within 24h · No commitment · ☎ (727) 513-8756

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in St. Petersburg ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm